creo drawing setup file options

murtagh March 22, 2022 creo , drawing , setup Comment

You can specify a default dtl file by using the configpro option drawing_setup_file and pointing to the actual file. Sets the default Detail option values for your Creo Parametric session otherwise the system uses the default Detail option values.

Creo Parametric Tip Information About The Drawing Setup File Rand 3d Insights From Within

The UI can be customized through a creo_parameteric_customizationui file.

. Configpro Notepad UDL Files. Select the dtl file that you need. These options are found in the Help Documentation the help you get within the application while editing your configpro from PTC downloadable CSV files and also hidden options found in the Creo Windows binary code.

If I create a drawing File New and then Drawing. Then File Prepare Drawing property then on change. All Drawing Setup options Creo Parametric 5060.

Path of the default configuration file of drawings. How to control the 3D Detail Options for newly created parts. Is it possible to set a drawing setup file option through Creo Parametric J-Link similar to user action through File Prepare Drawing Properties Detail Options change.

The drawingdtl file was modified to the speicifications that was wanted on each configuration. This variable will specify the dtl file for basemaps. Each option found will have a link to Help documentation if its available and hidden added when it was only found in the binary code of the application.

This Creo Parametric tutorial shows you how to create and manage drawing dtl files to control the appearance of dimensions text arrows tolerances and ot. ADD_TK_RIBBON hidden ADD_TO_LAYER_BY_COMP_NAME hidden ADD_WELD_MP. Assuming that the detaildtl file is in my sample folder drawing_detail_file cptc_userscommondetaildtl.

This is a PDF version of Article CS43154 and may be out of date. Default values are provided for the drawing options but you can customize and save various versions for use in other drawings. How to configure customized drawing setup file dtl as default when creating drawings How to set customize drawing options file dtl as default for drawings.

All Drawing Setup options Creo Parametric 30 M170. While in the drawing is open FileDrawing Options. If you have more than one one for metric one for English one for dual dims etc you can put them all in the same folder and use.

The file that you specify in the drawing_setup_file configuration option establishes the default Detail options for any drawing that you create during a Creo Parametric session. In my case drawingdtl. The drawing setup file can be accessed by selecting the File tab Prepare Drawing Properties and then click on the command next to the Detail Options area.

Drawing setup files or dtl files are text files that control display options for drawings. Creo ModelCHECK start_config_options Drawing Detail File Drawing Detail File The settings in the current drawing detail file also known as the drawing setup file are compared to the settings in a standard drawing detail file that is saved on disk. Creo Parametric configpro Check Utiltity.

All Drawing Setup options Creo Parametric 20 M250. Sets the default text height for all text in the drawing using the value set for drawing_units. Creo Parametric can be configured in several ways.

2D drawings have additional configuration settings in the drawing setup file. Complete lists of Drawing Setup Options. Click the File tab Prepare Drawing Properties.

Complete lists of Configpro Options. Access and Edit the Drawing Setup File and its Options. All Drawing Setup options Creo Parametric 40 M150.

All Drawing Setup options Creo Parametric 6060. Open your drawing file. Unable to set the option model_detail_options_file for new created parts.

All Drawing Setup options Creo Parametric 10 M050. But it also has a lot of configuration settings available through the configpro configuration file. These settings are stored in your drawing as well.

All Drawing Setup options Creo Parametric 7070. For fixing the drawings individually WF5Creo. ProE Programmers Speak in 2000i2.

In the pop-up window pick the Open Icon The folder opening icon. The drawing_setup_file config option tells Creo where to find the drawing setup file on your computer. In your configpro file which is in your home or start-in folder put this.

It points to the detaildtl file you created. To assign the drawings parameter values to the format you must retrieve the drawings setup file into the format. If you do not set this option Creo Parametric uses the default.

ADJUST_EXPORT_ACCURACY hidden ADJUST_LAYOUT_DEPENDENCIES hidden ADJUST_NOTEBOOK_DEPENDENCIES hidden ADVANCE_COMP_PLACEMENT_UI hidden ADVANCED_INTERSECTION. Sets the default text thickness for new text after you regenerate an existing text whose thickness has not been modified. New drawings have default detail options with configpro drawing_setup_file set Information on the config pro_dtl_setup_dir Getting warning message CdataAAAAXXXXdtls does not exist.

Configpro option model_detail_options_file does not show any effect on newly created parts. Click on next to the Detail Options area. Enter the value in drawing units.

Creo Parametric Tip Information About The Drawing Setup File Rand 3d Insights From Within